Update implementation

MDK-Packs.IoT_Socket.pdsc

@@ -15,6 +15,8 @@
   <releases>
     <release version="1.4.1-dev">
       Active Development ...
+      Aligned return codes with the documentation
+      Added the lwIP Socket layer
     </release>
   </releases>
   <apis>
@@ -81,7 +83,7 @@
         <file category="sourceC" name="source/vsocket/iot_socket.c"/>
       </files>
     </component>
-    <component Cclass="IoT Utility" Cgroup="Socket" Csub="MDK Network" Capiversion="1.2.0" Cversion="1.3.0" condition="MDK Network Stack">
+    <component Cclass="IoT Utility" Cgroup="Socket" Csub="MDK Network" Capiversion="1.2.0" Cversion="1.4.0" condition="MDK Network Stack">
       <description>IoT Socket implementation with MDK Network</description>
       <RTE_Components_h>
         <!-- the following content goes into file 'RTE_Components.h' -->
@@ -92,7 +94,7 @@
         <file category="sourceC" name="source/mdk_network/iot_socket.c"/>
       </files>
     </component>
-    <component Cclass="IoT Utility" Cgroup="Socket" Csub="FreeRTOS-Plus-TCP" Capiversion="1.2.0" Cversion="1.0.0" condition="FreeRTOS-Plus-TCP Stack">
+    <component Cclass="IoT Utility" Cgroup="Socket" Csub="FreeRTOS-Plus-TCP" Capiversion="1.2.0" Cversion="1.1.0" condition="FreeRTOS-Plus-TCP Stack">
       <description>IoT Socket implementation with FreeRTOS+ TCP</description>
       <RTE_Components_h>
         <!-- the following content goes into file 'RTE_Components.h' -->

layer/FreeRTOS_Plus_TCP/README.md

@@ -1,5 +1,5 @@
 Socket: FreeRTOS+TCP (Ethernet)
 -------------------------------
 
-[IoT Socket](https://mdk-packs.github.io/IoT_Socket/html/index.html) interface using FreeRTOS+TCP over Ethernet via 
+[IoT Socket](https://mdk-packs.github.io/IoT_Socket/latest/index.html) interface using FreeRTOS+TCP over Ethernet via 
 [CMSIS-Driver Ethernet](https://arm-software.github.io/CMSIS_6/latest/Driver/group__eth__interface__gr.html).

layer/MDK_Network_ETH/README.md

@@ -1,6 +1,6 @@
 Socket: Ethernet IoT Socket (MDK-Middleware Network)
 ----------------------------------------------------
 
-[IoT Socket](https://mdk-packs.github.io/IoT_Socket/html/index.html) interface using 
+[IoT Socket](https://mdk-packs.github.io/IoT_Socket/latest/index.html) interface using 
 [MDK-Middleware Network](https://arm-software.github.io/MDK-Middleware/latest/Network/index.html) module via 
 [CMSIS-Driver Ethernet](https://arm-software.github.io/CMSIS_6/latest/Driver/index.html).

layer/VSocket/README.md

@@ -1,5 +1,5 @@
 Socket: VSocket
 ---------------
 
-[IoT Socket](https://mdk-packs.github.io/IoT_Socket/html/index.html) interface using Virtual Socket on 
+[IoT Socket](https://mdk-packs.github.io/IoT_Socket/latest/index.html) interface using Virtual Socket on 
 [Arm Virtual Hardware](https://www.arm.com/products/development-tools/simulation/virtual-hardware).

layer/WiFi/README.md

@@ -1,7 +1,7 @@
 Socket: WiFi
 ------------
 
-[IoT Socket](https://mdk-packs.github.io/IoT_Socket/html/index.html) interface using WiFi module via 
+[IoT Socket](https://mdk-packs.github.io/IoT_Socket/latest/index.html) interface using WiFi module via 
 [CMSIS-Driver WiFi](https://arm-software.github.io/CMSIS_6/latest/Driver/index.html).
 
 The file `socket_startup.c` configures the WiFi connection with these settings:

layer/lwIP/README.md

@@ -0,0 +1,6 @@
+Socket: Ethernet IoT Socket (lwIP)
+----------------------------------------------------
+
+[IoT Socket](https://mdk-packs.github.io/IoT_Socket/latest/index.html) interface using 
+[lwIP](https://github.com/Open-CMSIS-Pack/lwIP) module via 
+[CMSIS-Driver Ethernet](https://arm-software.github.io/CMSIS_6/latest/Driver/index.html).

layer/lwIP/RTE/Network/ethif_config.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ETHIF_CONFIG_H
+#define ETHIF_CONFIG_H
+
+//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
+
+// <o>Connect to hardware via Driver_ETH# <0-255>
+// <i>Select driver control block for MAC and PHY interface
+#define ETH_DRV_NUM         0
+
+// <h>Ethernet MAC Address
+//   <o>MAC Address byte 1 <0x00-0xff>
+#define MAC_ADDR0           0x02
+
+//   <o>MAC Address byte 2 <0x00-0xff>
+#define MAC_ADDR1           0x00
+
+//   <o>MAC Address byte 3 <0x00-0xff>
+#define MAC_ADDR2           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR3           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR4           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR5           0x00
+// </h>
+
+//------------- <<< end of configuration section >>> ---------------------------
+
+#endif

layer/lwIP/RTE/Network/ethif_config.h.base@1.0.0

@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2019 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ETHIF_CONFIG_H
+#define ETHIF_CONFIG_H
+
+//-------- <<< Use Configuration Wizard in Context Menu >>> --------------------
+
+// <o>Connect to hardware via Driver_ETH# <0-255>
+// <i>Select driver control block for MAC and PHY interface
+#define ETH_DRV_NUM         0
+
+// <h>Ethernet MAC Address
+//   <o>MAC Address byte 1 <0x00-0xff>
+#define MAC_ADDR0           0x02
+
+//   <o>MAC Address byte 2 <0x00-0xff>
+#define MAC_ADDR1           0x00
+
+//   <o>MAC Address byte 3 <0x00-0xff>
+#define MAC_ADDR2           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR3           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR4           0x00
+
+//   <o>MAC Address byte 4 <0x00-0xff>
+#define MAC_ADDR5           0x00
+// </h>
+
+//------------- <<< end of configuration section >>> ---------------------------
+
+#endif